Sprinkler Pump Controller 0

Sprinkler Pump Controller

Posted on

Sprinkler Pump Controller

The panel come in various of range from 15HP to 200HP using 415V 3PHASE, 50HZ. There is two types of electrical starter available for this controller, either star-delta starter or auto-transformer voltage reduced starter depending on the horsepower use. The standard panel is built for wall mounted type or floor standing type depending on the size of the panel and indoor use only. For special requirement, the panel can also be available above 200HP or in weatherproof type (outdoor).

Jockey Pump Controller is also standard built-in for both controller. The panel can control either 2 electrical pump or 1 electrical pump and 1 diesel engine pump.

Construction
Standard 1.5 mm thick mild steel plate, coated with “signal red” epoxy paint, fully compartment for individual pump control.

Standard Features and Indications

  • Phase light indicator
  • Pump run and trip indicator
  • Pump on manual and auto indicator
  • A/C failure indicator
  • Manual start and stop push button
  • Incoming isolator or MCCB for power supply
  • Individual MCB/ MCCB for each pump
  • Individual MCB for each pump controller
  • Auto/ Off/ Manual selector switch for each pump
  • Starter solenoid on and fail to start indicator for diesel engine controller
  • Battery on and fail indicator for 2 sets of battery diesel engine controller
  • Battery selector switch
  • Engine over speed and high temperature indicator for diesel engine
  • 2 sets of voltmeter and ammeter for diesel engine controller
  • 2 sets of automatic battery charger for diesel engine
  • Automatic cranking system and fail status for diesel engine
  • Fuse protection for AC and DC output for diesel engine controller
  • Pump run and trip status to fire alarm system

Certified & Approved by: Jabatan Bekalan Electrik Dan Gas TKL (PS) 79/98