With the growing emphasis on safeguarding property as well as people, the market for automatic fire suppression systems is booming. The EP203 three zone automatic extinguisher panel from Context Plus has been specifically designed to meet this demand. Fully compliant with EN 12094 part 1 (the European standard for Fixed Firefighting Systems – Components for Gas Extinguishing Systems), the panel epitomises quality, durability and reliability and is ideal for use in any area housing expensive, dangerous or irreplaceable items of equipment. Featuring an intuitive 128 x 64 pixel two-colour graphic display that gives clear and concise feedback to the user, installer and commissioning engineer, the panel also includes six monitored inputs (including hold and abort), a time stamped log, adjustable flood times and volt-free changeover relays for fire, local fire, 1st stage active, 2nd stage active, extractor fan and fault. The panel is supplied in an elegantly styled, durable enclosure with all of its electronics – apart from its powerful 3A EN54-4 switch mode PSU – mounted on a detachable metal bridge plate for ease of installation. A wide range of ancillaries are also available including remote status units, hold-off and abort buttons, line terminators and output expansion relay boards. ADVANTAGES • Fully compliant with EN 12094 part 1 • Functions as a standard three zone fire panel with additional circuitry for controlling the release of fire-suppressing gas into protected areas • Unique 128 x 64 pixel graphical display facilitates straightforward system programming • Any combination of activated zones can be programmed to automatically start the panel’s extinguishant release sequence • Includes a pull-down front-panel manual release button and two keyswitches for accessing the panel’s functions and toggling between auto/manual mode • Three conventional sounder circuits (two x 1st stage, one x 2nd stage) • Powerful 3A EN54-4 compliant switch mode PSU • Low quiescent current – less than 40mA on mains fail • Wide range of monitored inputs and auxiliary outputs (see schematic) • Abort and hold inputs allow the panel’s release sequence to be cancelled or suspended at any time • Time-stamped event log • RS485 connections for up to eight flush or surface remote status units with their own LCDs, manual release and mode (auto/manual) switches. Single gang economy status units (without an LCD) are also available. • Extensive range of commissioning and engineering functions • Optional relay expansion boards and single gang abort and hold buttons • Ideal for use in computer rooms, telecommunication centres, archive storage areas, chemical plants, generator rooms, museums, etc.. • System line terminator included with all panels Specifications Technical...

Contex t Plus’s XFP range of networkable analogue addressable fire panels offer high performance at a competitive price. Certified to the latest versions of EN54 parts 2 & 4 by the Loss Prevention Certification Board, two versions are available – a cost-effective single loop 16 zone panel in a plastic enclosure and a robust 1 or 2 loop 32 zone metal panel. Ideal for use in office blocks, shopping complexes and big industrial sites as well as smaller stand-alone applications, both versions offer an array of user and installer-friendly features. ADVANTAGES • Full compatibility with Apollo’s XP95/Discovery and Hochiki’s ESP protocols • The ability to interconnect up to eight XFP main panels (any variant) onto a two wire RS485 network. Alternatively, up to eight XFP repeaters can be connected to a non-networked XFP main panel • Combined keypad / keyswitch entry to Access Levels 2 & 3 • Two programmable inputs • A fault output relay and three programmable relay outputs with voltage free changeover contacts • Three zone dependency functions (A, B & C to EN54-2 Clause 7.12) • A day/night (building occupied/unoccupied) function • An investigation delay period function • Individual sensitivity settings for each device • A phased evacuation and delays to outputs facility (to EN54-2 Clause 7.11) • An alarm counter that records the number of times the panel has been in an alarm state (to EN54-2 Clause 7.13) • Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop • An integral EN54-4/A2 switch mode PSU rated @ 185-260V a.c. 50/60Hz (1.4A on a 16 zone panel, 3A on a 32 zone panel) • Earth fault monitoring • An easy to read, 80 character back-lit display • 40 characters of custom text per device • 999 event monitoring • Full compatibility with Context Plus’ Hush Button fire alarm solution for houses of multiple occupation...

  LPCB certified to the latest revisions of EN54 parts 2 and 4, our new-look super-enhanced CFP conventional fire panel offers an array of user and installer-friendly features at a very competitive price. Supplied in an attractive flush or surface mountable plastic enclosure, 2, 4 and 8 zone versions are available, each featuring four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/keyswitch entry. A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided. ADVANTAGES • LPCB certified to the latest versions of EN54 Parts 2 and 4 • Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry to access level 2 • 2, 4 or 8 zone circuits (dependent on model purchased) • Four conventional sounder circuits • Integral 1.5A EN54-4/A2 compliant switch mode PSU • Wide range of engineering functions including zone test, coincidence*, zone delay and non-latching zones* • Two on-board relays (Fire and Fault) • Two open-collector outputs (Remote and Reset) • ‘Class change’ and alert inputs • Installer-friendly design accommodates easy first fix and straightforward maintenance • Attractive flush or surface mountable plastic lid and enclosure – no bezel required • Low quiescent current • Multiple indicators • End of line units included (one per zone) • MAncillary system expansion connections provided for up to eight two-wire repeaters (one CFP761 network driver card required per system) and optional CFP relay boards • Space for two x 12V 3.2Ah VRLA batteries...

SmokeSabre is a major step forward in the design of aerosol smoke detector testers. All other pressurised aerosol smoke alarm testers have the inherent drawback that, if used too close to the detector, they leave harmful residue on the casing and / or inside the chamber of the detector. This residue can discolour the casing, can attract dust, affect sensitivity and, in some cases, lead to corrosion, cracking or even complete failure of the detector. SmokeSabre inhibits use too close to the detector and eliminates harmful residue while focussing and targeting the canned smoke test gas. When SmokeSabre is in the closed position the sabre prevents access to the spray button. You can spray only when the sabre is fully extended. In use, air is drawn through the holes in the sabre and this, coupled with the venturi effect involved, assists the velocity and vaporisation process of the airborne ‘smoke’ particles. The result is a more effective test, delivering better detector activation, using less gas per test, and reducing costs while eliminating harmful residue. SmokeSabre is a universal test product covering the sensitivity range of all smoke detectors (see particle size comparison chart). The extending sabre is made of 100% biodegradable plastic making SmokeSabre the only smoke detector test aerosol to be both recyclable and eco-friendly*. SmokeSabre is UL listed, meets global testing standards, and is approved by major smoke detector manufacturers. ADVANTAGES • More tests per can • Faster detector activation and clearing • Lowest cost per test • The end of harmful residue – risk is designed out with the sabre • Silicon free testing • Eco-responsibility – 100% bio-degradable sabre, ozone friendly, no CFCs and GWP free propellant* • Detector manufacturer endorsement and UL Listing • 150ml can Using SmokeSabre Testing with SmokeSabre aids compliance with codes and standards globally. “Point smoke detectors should be functionally tested by a method that confirms that smoke can enter the detector chamber and produce a fire alarm signal (e.g.: by use of apparatus that generates simulated smoke or suitable aerosols around the detector). It should be ensured that the material used does not cause damage to, or affect the subsequent performance of, the detector…” BS5839 1: 2002; 45.4 (D) “…the detectors shall be tested in place to ensure smoke entry into the sensing chamber and an alarm response.” NFPA 72 Chapter 10 (10.4.2.2 3g)   SmokeSabre inhibits use too close to the detector and eliminates harmful residue while focussing and targeting the canned smoke test gas.     PARTICLE SIZE...

2001-E is a three poles magnetic type relay with adjustable dashpot. This versatile model has been professionally designed to cater for the needs of circuit breaker and motor overload protection. The three single phase operation coils are directly connected to the load circuit. Under overload condition, the drag of pistons in the dashpot taken place and rise up to trip the switch assembly. 2001-E is designed with ease-of-use and practicality in mind. Current settings can be easily adjusted by screwing the dashpot up or down within its support and are indicated by the arrows on the calibration plate. Time delay is adjusted by changing the different sized holes on the aluminium plate in the piston assembly. This relay can be set up for manual or automatic reset. To change from manual to auto reset mode, simply unscrew screw ‘A’, remove spacer, press and hold RESET button until the screw is tightened. TRIP / TIME CHARACTERISTICS Specifications Technical...

ADVANTAGES • Long service life • Rugged contruction • Extreme temperature performance • Fast recharge • High discharge rates • Low internal resistance...